CTX H - hygienic series

Materials, data and limits

Casing Stainless steel AISI 316L electropolished Ra<0.8
Impeller Stainless steel AISI 316L electropolished Ra<0.8
Mechanical seal Single, SiC/carbon (std) or SiC/SiC, FDA approved
Double, SiC/carbon (std) or SiC/SiC, FDA approved
O-rings EPDM, FKM, NBR (all FDA approved)
Motor IP55; IEC frame B35; PTC thermistor; IE3; 3-phase
Pressure rating @ 20OC PN10 – CTX 40-165, CTX 50-145, CTX 50-200,
CTX 65-175
PN16 – CTX 65-230, CTX 65-240, CTX 80-205,
CTX 80-212, CTX 80-260, CTX 100-230
Liquid temp. -10 °C ... +120 °C
(140 °C for short periods during SiP)
Ambient temp. -20 °C ... +40 °C
Viscosity max ~150 cSt
 

Built-on inverter

The Inverter allows full control over the operation of the pump by influencing motor speed. Changing motor speed affects the pumping parameters.

Hygienic shroud

The hygienic motor shroud in AISI 304L protects the motor against flooding, deposition of dirt, from spraying water during pump cleaning procedure.
 

Adjustable feet

The per fect solution allows the pump to be easily adapted to uneven, sloped ground. It can be used when there is need move to different location.

Brackets for fixing on concrete fundaments

Complete pump unit may stand on a baseplate to avoid movement. It can be firmly, permanently fixed to the ground.
 

Connection dimensions

Model DIN 11851 thread (std.) DIN 32676 clamp SMS3017 clamp SMS 1145 thread RJT thread
Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet
40-165 DN40 DN32 DN40 DN32 38 33.7 38 32 1.5” 1.25”
50-145 DN50 DN40 DN50 DN40 51 38 51 38 2” 1.5”
50-200 DN50 DN40 DN50 DN40 51 38 51 38 2” 1.5”
65-175 DN65 DN50 DN65 DN50 63.5 51 63.5 51 2.5” 2”
65-230 DN65 DN50 DN65 DN50 63.5 51 63.5 51 2.5” 2”
65-240 DN65 DN40 DN65 DN40 63.5 38 63.5 38 2.5” 1.5”
80-205 DN80 DN50 DN80 DN50 76.1 51 76 51 3” 2”
80-212 DN80 DN65 DN80 DN65 76.1 63.5 76 63.5 3” 2.5”
80-260 DN80 DN65 DN80 DN65 76.1 63.5 76 63.5 3” 2.5”
100-230 DN100 DN80 DN100 DN80 101.6 76.1 101.6 76 4” 3”