Features & Benefits
Easy to maintain – 70% fewer parts
Flexible to install – connections may be rotated 180°
Application
Oil, fat, gasoline and other
petroleum products
Ink, paint, glue and resins
Solvents, alcohol and emulsions
Metal series diaphragm pumps
The compact, smooth and simple design is common for this series. Materials available are aluminium, cast iron, stainless steel and PTFE coated aluminium.
You will discover the ingenious simplicity when you maintain the pump. We use approximately 70% fewer parts than our competitors use to build similar sized pumps.
Aluminium and cast iron pumps
For transfer of pH-neutral fluids, both thin, thick, solid laden or abrasive. The aluminium and cast iron pumps are found in most fields; work shop and paint industries, purifying plants etc., to mention only a few.
AISI 316 stainless steel pumps
Made in lost wax cast method, ensuring great accuracy and finish. The stainless steel pumps combine great mechanical strength with good chemical features. AISI 316 is resistant to aggressive liquids like nitric acid and sodium hydroxide. The centre unit, which is not in contact with liquid, is made from corrosive resistant polypropylene (PP) as standard (other materials upon request).
ATEX certified pumps
All metal pumps are available in explosion proof ATEX marked version. They are supplied with earth connection and conductive materials; conductive centre section (on AISI 316 pump), diaphragms in PTFE (conductive back) or EPDM (conductive).
Typical applications
| Industry | Example of application |
| Workshop | Oil, fat, solvents, water, cooling fluid, lubricants |
| Print & paint | Glue, additives, varnish, ink, paint, latex, acid, resins, pigments |
| Mining & construction | Adhesives, sump, dewatering, coal sludge, pastes |
| Ceramic industry | Abrasives, glaze, water, enamels, clay |
| Chemistry | Acids, alkalis, alcohol, solvents, latex, emulsions |
Aluminium and cast iron for thick and thin pH neutral liquids. Stainless steel for chemicals.
Material of components
| Component |
Model: Material |
| Pump housing and all thermoplastic details |
Aluminium, cast iron och AISI 316L |
| Centre block, alu and cast iron pumps |
Aluminium (standard) or cast iron |
| Centre block, AISI 316 pumps |
T25: T70 – T420: PP (standard) or conductive PP
|
| Diaphragms | NBR, PTFE or EPDM |
| Valve ball |
NBR, PTFE, AISI 316L, EPDM, polyurethane or ceramic |
| Air valves |
Brass/NBR or optional AISI 3161/FKM |
| O-rings | EPDM, NBR or FKM |
| Housing pin screws | Alu and cast iron: steel Stainless steel: stainless steel AISI 304 |
| Diaphragm shaft | Stainless steel AISI 304 |
| Drum handle (TD pumps) |
T25-T120: stainless steel AISI 316L T220 – T420: – |
1. Flexible installations
The connections may be rotated 180°. Simply turn the connections to fit your piping system. Threaded BSP or NPT connections is standard. Twin connections are also available.
2. Powerful valveseats
The valve seat is under constant stress from the movement of the valve ball. To obtain the best wear resistant, the integrated seat is made from AISI 316 stainless steel.
3. Low air consumption
The air distribution system is designed with shortest possible air distribution ways. This eliminates ”dead spaces”, resulting in high effiencey and low air consumption.