Work efficiently by setting the number of pump strokes and/or volume only once.
- no elctricity needed.
The pneumatic batch unit allows you to set and pump a certain number of pump strokes – all this without any electricity.
The system is easily applied on all Tapflo pumps. Only the exhaust muffler has to modified with a hose connection.
When the batch is started, the unit will count the number of pump strokes the pump is doing. The pump strokes are sensed from the variation of pressure in the air exhaust by a pressure switch (placed in the counter unit).
Let us say that you are using a T50 to fill containers of the sizes 5, 10 and 25 litres. What you first once have to do is to manually prime the different volumes and record have many strokes the pump needs. For future batching, just enter the number of strokes and press ”start”. The batch unit will start the pump, count down and finally stop the pump when the batch is finished.
|Control and alarm unit
||140 × 130 × 110
|Available for all Tapflo pumps|
|Material of junction box, protection:
ABS plastic (IP 55 or IP 65) or
stainless steel AISI 316 (IP 44)