Wszystkie perystaltyczne

Pompy perystaltyczne


Seria PMA


Seria Z


Tapflo PT hose pump combines the best
materials with smart design solutions.


Tapflo PT hose pump combines the best
materials with smart design solutions.


Seria DL

  • Wszystkie perystaltyczne
  • Pma
  • Z
  • Hose-pumps-slideshow
  • Hose-pumps-slideshow-2
  • Dl

Pompy perystaltyczne


Seria PMA – pompy do dozowania lub przetłaczania cieczy przy mniejszych przepływach


Seria Z- pompy do dozowania lub przetłaczania cieczy przy większych przepływach


Wysokociśnieniowe pompy serii DL wytwarzają ciśnienie nawet do 15 bar


Seria DSC – Bardzo silna konstrukcja odporna na wysokie ciśnienia do 15 bar

  • All
  • Pma
  • Z
  • Dl
  • Dsc

PT hose pump
– a reliable  choice


Combines the best materials with smart design solutions

Maximises running time and minimises service


Particularly suited to
abrasive, corrosive, shear sensitive or viscous fluids

Pcm-peristaltic 0001 warstwa-3
Pcm-peristaltic 0000 warstwa-2


Pcm-peristaltic 0002 warstwa-4




Hose Pumps
- the PT series

Tapflo PT is a hose pump of the latest design. We have combined the best materials with smart design solutions in order to maximise running time and minimise service.

How they work  

The principle of operation of the pumping action in Tapflo hose pumps is achieved by pinching a circular loop of rubber tube with two diametrically opposed rotating wedges. Due to the rotational movement, the fluid in the tubes is pushed ahead of each wedge. When each wedge reaches the end of the loop, the hose is released and the wedge rotates n to the start of the loop to begin a new cycle.

As the wedge releases the reinforced tube, it immediately returns to its original shape, there by ensuring positive suction and priming. This construction makes it a smart and effective choice for a wide range of pump applications.

Typical application

The pump housing is partially filled with lubricant, thereby allowing smooth running of the wedges on the tube. The pump fluid is only in contact with the inside of the tube and can therefore be of an aggressive nature and/or contaminated with particles. PT pumps are commonly used for:

Industrial waste water, waste sludge treatment, flocculent dispersions, flocculated waste, lime liquor, sludge and slurries, ceramic slips and paste, clay suspension and compounds, cement slurries, concrete pumping, ore slurries and leaching pulp, metallic salts, crystallized suspensions, black liquor foam, filter press applications, cosmetics, pharmaceuticals, etc.



Features & benefits

Self priming up to 9 meters
manometric lift
– Flexible installation

Hoses reinforced with
four layers of polyamide
 – Doubles the life time of the hose

The drive of the pump is independent
of the pumping system
– eliminates risk of liquid in the drive

Maintenance is done with
the pump in the system
– minimized service time and
therefore a more economical
pump solution

Precise volumetric flow
– Accurate for dosing applications

Continuous run dry
capability without damage
– Less risk for costly breakdown

Reversive pumping action
– Useful in cleaning cycles

High discharge pressure: up to 15 bar
– Manages high viscous products and high pressure applications

 The hose is the only wearing part
– Easy maintenance