Pompes péristaltiques PT
Le bon choix

La combinaison des meilleurs matériaux et de la meilleure technologie

Augmentent  l’efficacité et minimise la maintenance


Parfaitement adaptées aux liquides abrasifs, corrosifs, craignant le cisaillement et visqueux.

Pcm-peristaltic 0000 warstwa-2



Pcm-peristaltic 0001 warstwa-3
Pcm-peristaltic 0002 warstwa-4



Pompes Péristaltiques
- la série PT

La pompe péristaltique Tapflo est de la dernière génération. Nous avons rassemblé les meilleurs matériaux et une conception intelligente afin d’obtenir une durée de vie maximale et une maintenance minimum.

How they work  

The principle of operation of the pumping action in Tapflo hose pumps is achieved by pinching a circular loop of rubber tube with two diametrically opposed rotating wedges. Due to the rotational movement, the fluid in the tubes is pushed ahead of each wedge. When each wedge reaches the end of the loop, the hose is released and the wedge rotates n to the start of the loop to begin a new cycle.

As the wedge releases the reinforced tube, it immediately returns to its original shape, there by ensuring positive suction and priming. This construction makes it a smart and effective choice for a wide range of pump applications.

Typical application

The pump housing is partially filled with lubricant, thereby allowing smooth running of the wedges on the tube. The pump fluid is only in contact with the inside of the tube and can therefore be of an aggressive nature and/or contaminated with particles. PT pumps are commonly used for:

Industrial waste water, waste sludge treatment, flocculent dispersions, flocculated waste, lime liquor, sludge and slurries, ceramic slips and paste, clay suspension and compounds, cement slurries, concrete pumping, ore slurries and leaching pulp, metallic salts, crystallized suspensions, black liquor foam, filter press applications, cosmetics, pharmaceuticals, etc.

Gör om text ovan till tabell nedan!
Industry   Example of application
Food-, beverage- and
pharmaceutical industries

A variety of auxiliary applications, like transfer of water, edible oil, alcohols, detergents, and CIP cleaning liquids.
Mechanical industry

 Mechanical industry

Handling of water and coolants etc

Chemical Industry

Transfer of a variety of mild chemicals and solvents


Features & benefits

Self priming up to 9 meters
manometric lift
– Flexible installation

Hoses reinforced with
four layers of polyamide
 – Doubles the life time of the hose

The drive of the pump is independent
of the pumping system
– eliminates risk of liquid in the drive

Maintenance is done with
the pump in the system
– minimized service time and
therefore a more economical
pump solution

Precise volumetric flow
– Accurate for dosing applications

Continuous run dry
capability without damage
– Less risk for costly breakdown

Reversive pumping action
– Useful in cleaning cycles

High discharge pressure: up to 15 bar
– Manages high viscous products and high pressure applications

 The hose is the only wearing part
– Easy maintenance